OZONE AGING TESTER
The surface of the specimens is observed for discoloration or cracking.
Brand / Model: Anseros / SIM-7300-TH
Ozone Source: Ambient air
Operating Range: 25 - 1000 pphm ozone concentration
THERMAL AGING TESTER IN HEAT AND MOISTURE CONDITIONS
Provides aging of samples with humidity control and temperature control.
Brand / Model: Aralab / 1500 EC75
Temperature Range: -70oC to 180oC
Relative Humidity: 10% to 98%
Internal Capacity: 1500 liters
XENON-UV AGING TESTER
The surface of the specimens is observed for discoloration or cracking.
Brand / Model: Atlas / CI4000
HDT-VICAT TEST DEVICE
It allows to determine whether the samples can maintain their form when exposed to high temperatures and to which temperature they can be used.
Brand / Model: Instron / Ceast HV3
Maximum Operating Temperature: 300oC
TABER ABRASION TESTER
It provides surface wear, mass loss and color change investigations.
Brand / Model: Taber / 5155 Abraser
Rotation Speed: 60 and 72 rev / min
Applied Weight: 250, 500 and 1000 grams
HARDNESS MEASURING DEVICES
It provides the measurement of Shore A and Shore D hardness of samples.
Brand / Model: Amittari / AS-120A and AS-120D
HORIZONTAL FLAMMABILITY TEST CABIN
It enables determination of burning rates of materials.
Brand / Model: Atlas / HMV
GAZ PERMEABILITY TESTER
In tests performed according to different pressure methods in accordance with ASTM D 1434 and ISO 15105-1 standards, O2, N2 and CO2 gas permeability levels can be measured in 3 samples at the same time
Brand / Model : Labtink / VAC-V2
Operating Temperature: 5 - 95 C
Measuring Range: Gas permeability levels in the range of 0.05-500000 cm³/m².24hours.bar can be measured in flat surface materials with a diameter of at least 12 cm and a thickness of up to 3 mm.
MELT FLOW INDEX (MFI)
The amount of material flowing under a certain load within 10 minutes is determined.
Brand / Model: Instron / MF20
Maximum Temperature: 400oC
FLUORESCENCE UV-AGING TESTER
The surface of the specimens is observed for discoloration or cracking.
Brand / Model: Atlas / UV Test
UV Lamps: UVB -313, UVA-340, UVA-351 nm
UL94 FLAMMABILITY CABINET
Combustion test is performed according to UL94 standard in petroleum based thermosets and thermoplastics .
Brand / Model: FTT / UL94
Device Features:
It can be measured according to 5VA, 5VB, V-0, V-1, V-2, HB fireproof classes.
INJECTION MOLDING MACHINE
It is an injection molding machine used to prepare thermoplastic samples .
Brand / Model: BOY / 22A Pro Lab Model
Injection Pressure: 65 tons
Sample Standards: ISO 527, ISO 178, ISO 179-2, ISO 180, UL-94
UNIVERSAL TENSILE AND COMPRESSION TESTER
Mechanical analysis of rubber samples is performed.
Brand / Model: Testform / AS1
Device Features:
Elasticity modulus , the yield in the tensile strength, yield of break strain (%), flexural modulus, maximum bending strength, bending resistance value of strain (%), compressive modulus, compressive strength, compressive strength value of strain (%)
